Yes, it was a test run. I wanted to see how well the internal fins would work. I think it turns quite well actually. The fins added a bit of...
[MEDIA] This is where I'm at so far. Still have to bond the aragonite onto the acrylic lip...
Thanks Matt! I spent some time in the garage today. Check my thread... I'll get a video up as soon as I figure out how to upload it.
Ok, so I spent some time in the garage with a cigar and scotch and this is what I came up with... I had to make the fins internal because I didn't...
Thanks! I personally had never seen a design like this before. I came up with the concept a couple years ago. I had been researching scrubbers for...
Thanks for the 'mold' tip mulcmu! I may use that as an alternate course of action if Turbo's 2 part epoxy suggestion doesn't work.
Ok, so I just had to pull my sump lid... This is my sump lid. I constructed the rectangular box with the mirrored and black acrylic together...
I came up with a version of a AS wheel concept a couple years ago. At the time I had posted the photo on SM's site. I recently revisited that...
The next time I pull my sump lid off I'll take a couple photos and post 'em for better reference. It did take a little extra time but I achieved...
Matt, Have you tried using mirrored acrylic? I had the same thought with reflectivity and using black acrylic. My solution was creating large...
[ATTACH]This is the pic I posted a couple years ago. [ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] Most recently, this is where I tried to bond the...
Thanks Turbo. I remember a couple years ago, I was trying to find that info out on SM's site. I had then posted an AS wheel concept photo and...
What type of two part epoxy would be reef safe?
Does anyone know what I can use to bond aragonite to acrylic? I'm trying another scrubber concept.
Separate names with a comma.
