Separate names with a comma.
Since I increased the number of red LEDs, an interesting phenomenon is happening. So I made small changes: - Increased the number of LEDs: 11 x...
To answer your questions: - I had two extra deep red LEDs and I replaced 2 of the royal blue LEDs for a total of 11x deep reds and 2 x royal...
A very interesting opinion, thanks. I'll let you know my NO3 & PO4 readings soon. Re: number of LEDs I do have 4 more royal blue LEDs that are...
Could you tell me please: - how much flow do you recommend for my ATS - if the kalk is inhibiting the algae..what about kalk & vinegar..as far as...
I appreciate your reply. To answer your questions: - I feed the corals too, not only the fish. I said 1-2 cubes but it's a rough estimate. You are...
The brown algae and the lack of proper ATS algae production is driving me crazy. Last weekend i did a 20% water change and I vacuumed the sump,...
Yes
Screen size: 7x10 inch (1 side) Cubes fed: 1-2 cubes Flow: aprox 400-500gal/h Illumination: LED 9 x 3W Deep-Red Luxeon ES (minimum-medium...
I've been having issues maintaining an ATS and also getting rid of brown algae from sand. The photos were taken 1 week apart, after scraping the...
Any new info regarding Triton + ATS?
I had to add a skimmer bcz the dry rock was dirtier than it looked, it generated a huge amount of ammonium and other nasty smells and colors....
You are making a visible progress. Congrats I've followed your advice and turned on a small skimmer but mine runs only 10h a day. I'm on 15-day...
I'll start cycling the tank next week: - fish-less - dry rocks & dry sand - dr. tim aquatics one & only formula + ammonium chloride (1 drop per...
It frags easily..that's not a problem ...but it refuses to eat. Other than that it looks healthy. Plenty of zooxanthellaes..
:) For sure..but there is only fresh water in that tank. That's the only idea I had to simulate a coral in action. My daughter is asking for her...
And this a video of my diy wavemaker box in action, the other compartment of the algae scrubber box. WARNING: Creepy hairy doll with blue eyes...
I'm not sure, if you'll find this info useful or not, during the LED wiring....I had a hard time soldering the wires to the led star bcz the LEDs...
This was the final test. Thank you for your support. [MEDIA]
I was able to finish the leds today, made a hole in the back wall and i've been running some temp tests at 100% power to check the cooling...
I was able to finish the scrubber last night. It's 7 x 10 inch. I've also followed your advice and brought the safety pipe at a lower level. It's...
