Separate names with a comma.
My friend has been doing this for years. He specializes in custom aquariums, sumps, and much much more. His products don't craze. Since I'm not...
You are right. You also don't want to give people too much information, because people are going to do what they want to anyways. I made a...
Great information. I would like to add You don't cover the importance of cooling the leds and how temperature can effect the lifespan. These...
Cool thanks Turbo! I'll have some questions for sure when i finish reading all of this.
Sorry in advance for the long post. It's a 125G reef tank with a 40B sump. My tank is built into the wall of my finished basement. I have a...
Look to see if what i am saying is possible by whatever means you feel necessary. Or prove me wrong. If you can't understand how a variance in...
Or you can try to understand it as an out of tolerance component that causes the driver to shut down. Plain and simple.
I get what you are saying. But have you ever had to test or repair a power supply with a bad bridge rectifier? Or a bad diode in general. The...
Let's toss the UVs. Toss the reds that had 9V applied to them. And test the other driver with the working leds
And my previous reply is only referring to the non working diodes. Not the working fixture.
I still think a single diode or multiple diodes diode are shorted out on each channel. Even after watching the video again. And it's either...
Let me look at it more. And if you want to talk about the led tester stuff message me. I can explain a little more of why it's important. But...
And the guys at rapid led will say it's no big deal because of the quality of the leds. But not everybody uses leds from rapid. Or Quality...
I overlooked the way they were hooked up. I have built about 30-50 DIY fixtures for tanks. I've seen leds dim like this when an individual diode...
It's cool. I'm not upset. I was wrong on some of the things i said, because i posted in a hurry too. I've been working with LEDs specifically...
You take this stuff way too seriously. Overvoltage to an LED should be common sense. Anytime you add excess current or excess voltage to an...
I am currently building an algae scrubber made from .220" acrylic. I'm also making a wooden stand for it to support the base held down by nylon...
Hey guys. I'm new to the forum, but I'm An electronic engineer. Your driver issue is a voltage issue rather than an LED issue. Basically the...
