Separate names with a comma.
THIS THREAD APPLIES MAINLY TO THE FIRST VERSION OF THE L2 ALGAE SCRUBBER On the slot pipe, the "tabs" made out of spa flex & zip ties tend to...
I really wish I could tell ya exactly how to make that happen. Seen it several times on my units from my customers, but I have no idea how they...
Thanks for the comments on the support - I try to help whoever asks!! Your cleaning looks about right, you might scrape a bit more starting with...
Here's Part 2 of 2 [media]
I thought that I had recorded the first cleaning (at 13 days) and lo and behold, I found it. So this is growth from a bare screen to 13 days on a...
Took this video yesterday afternoon. I was going to clean it last night, but I'm still recovering from a stomach bug I caught on Monday. So I...
I'm still waiting for my grant or donation to come in and fund me to research this among other things LOL
yeah ball valves can be very tricky to get right. Even if you take silicone grease and slather the ball with it and then open and close it a...
Sounds good. You might also try to find a 90 degree elbow that is hose barb on both ends to make a sharp 90, that will eliminate the kink that...
When you say it's noisier than you want, how so? I know you didn't get any add-on kits, since you had your own stuff laying around. You should...
I would just clean the top edge of the screen and the slot to keep the water flowing freely, and then just run it under room temp tap water and...
Here is the video before the first cleaning. Growth at 13 days from bare screen [media]
It started about 2 years ago with this thread: http://algaescrubber.net/forums/showthread.php?1181-The-Great-Algae-Light-Source-Experiment But...
Forgot the FTS from Monday Evening [IMG]
Last weekend was a killer. Before it all began, I finished the sump insert [IMG] [IMG] [IMG] Then with the help of a handful of local reef...
Been wanting to do this for a while. I had an L2 UAS running on my 120 since April of 2012. Here is that thread:...
Many people report an increase in the population of Copepods and Mysids after installing an Algae Scrubber. This is because these lifeforms feed...
You can have that problem with local HW stores, even the Lowe's and Home Depots will sometimes not have what you want. Have you tried the small...
The hose in the pics looks like 5/8" ID instead of 3/4", and while that may not seem to make that much of a difference, it really does. That and...
Just re-read a few posts...I would scrape the screen, which is not actually what you should have to do. I would think the rubbing it with your...
