Separate names with a comma.
I never said those lights are unsuitable. I don't have enough information to make that call...just throwing out ideas of what you can do to make...
Looks like 10 chips each, and they have lenses also? The lenses are meant to throw light far and keep it focused. Generally what you would use...
Slow growth right in front of the chip sounds like a bit of photosaturation - intensity is high. The single-chip theoretically should have been...
That does look a bit better, filling in around the edges, looks a little thicker There are many bryopsis strains, most of them are resilient...
Red growth like that does occur as the scrubber matures, nothing "wrong" with it, if it's turf-like you can scrape it off and it will come back,...
Growth could be related to the lights (spectrum, intensity, etc). Are they a pretty close match to what you had?
From the pic, if you are referring to the "T" as the "left channel" and the elbow as the "right channel", and water input is on the left side of...
Sorry for the delay, I've been out of state on a job training apprenticeship about 47 gallons Converting to inches (for me) that's 48, or about...
Nope, that's a good harvest technique. You could remove a bit more but if it doesn't come out of the holes easily, don't intentionally try to...
Sorry for the delay - was out of state for a week It's pretty hard to judge anything when the growth is just starting to kick in. The screen...
Pics always are good...post when you can
Looks good, it seems to be doing a pretty good job of growing algae. Now that you've accomplished that initial part, leave it be for at least a...
Look decent, but it's all a matter of perspective - can you share more details about your tank & scrubber & other filtration?
As long as you continue to feed, you'll have phosphates in the water column all the time, it's in all food/living things. I don't see anything...
Acrylic Fabrication Q & A
Go to one screen with those new lights. That's what I'd do.
I'm confused a bit about what you're describing - is your slot pipe 1/2? that is, are you planning to connect the pump to a threaded PVC...
As long as you match the power supply to the necessary input voltage, you're fine with that setup. Steve's makes my driver boards, custom, but...
Hmmm I stand corrected, it might be adequate, guess I need to check my numbers first! :eek: No, you would definitely need to use 3/4" ID tubing,...
