Separate names with a comma.
Looking better, I’d hold the course for now About the false bottom - why would you need to take it out to check flow?
The thing that provides the best "food" for algae is live animals. The concentration of nutrients will change over time if you have none in the...
I'd say you're at least 3 days from the water being 1/2 way up the end of the growth chamber.
Nice!
That'll work too! May not even have to do that much, just run under tap water and rub with your fingertips, or swipe your palm across it....
If I'm looking at that right, that's 6000 LPH => 1500 GPH max, the lowest setting I think is 48% (level 1) so that's over 700 GPH still. I'm...
Hmmm...A few questions: What is your flow? If you haven't measured, what pump are you using and what vertical head? What are your tank...
What I would do is let it continue to grow past the 7 day point and check it every day. The think about the presence of the emergency/secondary...
Textbook growth!
Solid, 20 gauge. I use the hookup wire from a company called Vetco (tinned copper) but you can use the Radio Shack stuff, or doorbell wire from...
Looks like that came off in one connected sheet, I'm guessing that the screen under it was bare afterward - the algae had detached from the screen...
I don't know what you're doing there. This is really simple, there are no resistors needed or anything [ATTACH] The LEDs in parallel will pull...
Ah - you're doing the math wrong. The current is the same through each LED. Think of it like water running through a closed-loop pipe and...
the LPC-35-700 operates at 700mA through a range of 9V to 48V total voltage drop. So you add up the voltage drop across each LED that you wire...
No optics - they come as 120 degree spread IIRC You can use a single $15 Meanwell LPC-35-700 for powering both arrays in series. You can put...
