Separate names with a comma.
I've had one customer that had a problem with ulva in the tank, he couldn't get rid of it. It ended up taking over the scrubber and he was not...
Yes that should be fine I would continue with your previous husbandry routine, but I don't know that the increase can be attributed to doing only...
If the previous change you made gets you where you want, I would leave it there for a while (two to four harvests) before changing it again....
Nice! I can't say I'm totally surprised, you had a solid base of growth to start with, so changing the hours in that scenario usually leads to a...
I would say that it can, but that's not always the case. A lot of that depends on the dynamics of your individual system, there are many factors...
#7 is the correct size mesh. When you say "bend" what do you mean exactly? Is the part of the screen you insert into the slot slightly longer...
I looked briefly and didn't see that you had posted a pic of your light fixture / LED arrangement. The bare spot in the middle is indicative of...
CFL should last at least 3 months at 18 hrs/day. What's the color temperature of the CFL @Zaiel12?
Saran wrap will not prevent growth from filling in the slot/screen junction, it just prevents streamers from jetting water away from your...
If that's ~30 days from a bare/new screen, you will want to at least give it a rub & rinse to loosen up any poorly attached growth. Usually you...
Like this [IMG] [IMG]
You probably shouldn't go over 21 days between cleanings, 16-18 is my max and at that point (with the growth this thick) the algae will all fully...
So this screen is on its last days. Actually it's been on it's last days for about 4 months. As you can see, even a beat up ratty screen can work...
I would say no. One scrubber enthusiast posted (on this site I believe) that he tested levels before and after cleaning, and went to an extreme...
the streamers are not a result of an improper width slot, unless your slot is narrower than 1/8" to begin with. Streamers result when you have...
1 month is a very short time for a tank to be up and running. Here's my favorite link: go to #15 Mything the Point, Part Three: Conclusion -...
Or this [ATTACH]
I would increase to 22 hours/day. Part of says go to 100% & 24/7 but creep up on that over the next couple weeks. Also let it grow a few extra...
Great! What do you have the intensity of the LEDs set at? How many hours/day do you run the LEDs? How often do you clean/harvest the algae off...
Unlikely that heat has caused the screen to bend. More likely, your slot is not pointing straight down or the slot is not straight and/or even width
