Separate names with a comma.
That's what the light blockers will help with. When you get the really thick growth, it will grow right up to and attach to the bottom edge of...
I should be able to ship something out next week. I'll contact you and let you know about payment
Well now you're just poking all kinds of holes in my "Rule of Thumb" on LEDs aren't you. Sheesh!
Interesting that you are running so many violets compared to the reds. I suppose that you can get away with running the violets at full current,...
How many reds and violets are you running on each side and at what current? violets at full current?
You need a light blocker! I have about 200 feet worth. What's the distance between the rings?
Is that a 3/4" pipe?
Dang that's awesome!!!
Once you get that base of growth that doesn't scrape off easily, say around the 4-6 week point, you essentially start off with about the same...
I didn't realize how grainy the video would be at the quality I rendered it. Here is the high-res version [MEDIA]
It won't affect the efficiency, but it looks like I might have been a little rough on that one, I'll send you a new screen with your upgrade kit....
Follow-up instructional video: applying patches using a brush in lieu of a squeeze bottle applicator [MEDIA]
[MEDIA]
Overview video of the Turbo HF (Rev 3) Algae Scrubber. [MEDIA]
Mandatory Fields has been disabled. I'm working with the developer to have him incorporate a work-around for Tapatalk, because the two do not...
Moved these to your thread :) Yes the #3 kit includes the new style slot pipe For the L3, I would run a Rio 1400 (or equivalent) minimum, and...
^^ nutrients = phosphate, nitrate, nitrite, ammoina ;)
Installed a few more real quick over lunch: Mandatory Fields: this one I had been wanting to do but didn't know it was out there already. It...
No, but in the video I use a razor blade to mark the hole and the center. If the hole ends up off-center a bit that's probably OK as there is a...
Just a 1/4" drill bit for the "pilot" hole, then a 2" diameter standard hole saw (with the center bit). Technically you don't need the separate...
