Separate names with a comma.
I should also note that I did remove the pump at the 1 week point, took it apart and rinsed it, but that was incidental as I had a fish in the...
This is a good example of the difference in growth. Here is 2 weeks growth on a Rev 1 L2 with diffusers in place [IMG] This is 2 weeks of...
I should note that I have recently remove the diffuser from one Rev 1 L2 that I am using and found that growth increased quite a bit (it was...
Here is a picture showing how I do this for the Rev 1 L2 that has not had the array modified [IMG] Here it is, lined up with the LED fixture...
Tank cleaned up [IMG] Welded the bottom joint and crack in the bottom panel. Solvent wicked in pretty well [IMG] Weight on it [IMG] I did...
Awesome!! Just for everyone, Joel's L2 is a Rev 1.5 of sorts, it's a Rev 1 box and LEDs (on the Heat Sink USA sinks) but his has the hole lowered...
Nice job of cleaning up the tank algae. Scrubber will get sent out in the next few days!
Here's my latest project. A friend picked up a failed sump for free. 180g, 72 x 24 x 24, all joints were capillary welded and panels were rough...
120g w/waterfall N = 20 (API) <- this is roughly the 'barrier' that the UAS could not break P = 0.15 (Hanna) <- the UAS never could get P this...
Got tied up and didn't get back to responding... I would say that after your screen gets cured up, you're looking at a few solid months of...
Yeah, that's a huge difference!! Awesome!! That is the result from 3/4/13 to 4/28/13, just short of 2 months. This is a textbook example of...
Yes, I believe an L2 would take care of this. I have customers who are feeding much more than 2 cubes/day with only scrubber + undersized skimmer...
Same question here, algae in tank is going away or 'going' as in growing? Also I've noticed that photobucket changed their tagging do that when...
I had to google that. The Rube Goldberg of the UK. Or maybe the other way around... But regardless, that's the basic idea. Heat it up with...
When the flow is high, water flow over the screen is almost always uneven until the screen gets growth. The screen on my personal scrubber was...
Actually Garf I am going to be doing this as well on future models...for anyone paying attention, Perspex is acrylic. So a piece of 1/16" black,...
So you're right at about 6 weeks. I would give the screen a good scrape, make sure any dark patches are removed well, and let it continue...
I also make a frag rack system, stackable 1" / 2" / 3" racks, 6.5" x 6" with 34 holes at 1" on center, 7/16" each (for Oceans Wonders frag plugs,...
Haven't updated this in a while. I finished off this one and built another since the last update! pics [IMG] [IMG] Then I polished it all up...
Algae Scrubber was installed on or around March 17th. It's been such a blur lately!! Anyways, here is how I installed it, I made a frame from...
