Separate names with a comma.
It's running with power split between one driver. Running 6 hrs on 6 hrs off then 6 on again. 12 hrs per day.
[ATTACH] Took about a week and a half before I started seeing some growth on the screen. I took the screen out today for the first cleaning....
I got new UVs from LED Groupbuy today. I very carefully pre tinned them, attached to heat sink, and wired them in. Plugged them into the PS on the...
Doing the math on my set up I am at about 45-50gph/inch. I was thinking that might be a bit much however the scrubber has only been running for...
Related to this conversation is too much flow possible? I have read the conversations regarding the flow calculations to ensure you have enough...
New UV LEDs on order, I will give it a try again when they arrive, hopefully a couple days. For now I have the ATS running 9hrs per day (3 on 3...
Thanks for the feedback! Yeah I am IT guy (thus the name JD-CPU-wiz) so I use VISIO for flow diagrams a lot. haha I will watch these vids...
I appreciate the help. The parts list is as follows: 12 Deep Red - Deep Red - 660nm 2 Hyper Violet - Exotic Hyper Violet LED - 430nm The driver...
So I got the new ulta violet LEDs from LED GroupBuy and tried to wire them in again last night. I am still struggling and I think I fried them...
Anxious to see how it works!
Made some progress tonight. Posted a couple videos Started up for the first time to check flow and for leaks [MEDIA] Added light fixtures (no...
I think I fried the blues on one of my miss wired attempts. When I wire it that way I still get no blues and the Reds look like they are half on....
So I got both fixtures put together today but I cannot get the blues to work. I don't understand what's wrong with my wiring. The Reds all work...
Got a good start building the new scrubber today so I thought I would share. Be kind, this is the first time I have built anything with acrylic....
So here is my lighting plan; looking for feedback... I ordered 2 Makers heat sinks (1 for each side) both 12" long. I now have 12 Cree 660nm LEDs...
I have most if not all the parts I need to start building my new ATS. I thought I would post a pic of the quick diy version I made that has been...
So I ordered some parts for my LED fixtures last night. I figure I will try to put those together before I finalize plans for the scrubber box....
I am new to this forum and I have been reading quite a few of the threads from other members and I have decided to move forward with a DIY ATS...
New to this forum and relatively new tank owner (2 years). I have read through this entire thread and I am pretty pumped about building my own...