Separate names with a comma.
System is still the same, just used some gfo to lower phosphates from 0.5 to 0.3 ppm. Everything else is still the same. The scribber has two...
I just lowered the photo period. What do you mean by "resetting the tank"? I didnt reset anything really Thx again
I didnt reset the tsnk, everything in it is the same. Just pulled our chaeto and put the scrubber in . Ok will add a teflon diffuser to the light...
Ok thanks a lot for the feedback Turbo. Will leave it for a few days running and see. Then maybe change the pump. One screen was aged but left in...
Hello again. I am back with a new ats scrubber (twin design using a brita box). Currently powered by rio 800 pump. Each screen is roughly 6 wide...
Ok thanks a lot for answering #2. I know reactors are not that effective because of the form factor. To get the same filtration from a scrubber...
So currently I am thinking of unplugging my algae scrubber and replacing it with a chaeto reactor. Just trying to save some room in the sump to...
Ok thanks for the reply - actually the lights are very strong but i have TWO LAYERS of teflon heat resistant white sheets to diffuse that light,...
This is all I am getting after like 2 weeks. I just rub it with my fingers once or twice a week
Thank you, will clean 2-3 times a week. Noted for the brush use, will skip that going forward. Question: you think it is a good idea to play with...
Ok, sounds good i guess there is no white film because i just gave it a good cleaning with a brush (i know i should not go that far) as part of my...
Just took a close up only see white in some of the square holes, take a look please
Ok will take a strong flash light and look closer at the screen again.
Given that brownish algae shall I increase photo period? It is at 15 hours now. I am very scared right now, because i know once nitrates start...
Hi turbo thanks for answering not really sure I can tell the difference. Here is a pic I just took now. Lmk whet you think please. If was like 2...
Hi Turbo, I did a mistake this week I turned of water flow in my scrubber for like a day or two and lights were left on (15 hours). So the screen...
fwiw, i am using strong led led, i used to diffuse them with plastic (semi-clear) but from the heat the plastic would end up shredding into...
thanks for the note turbo , but i have a skimmer (hang on back in a sump) but working well not oversized for the tank as well as a bag of carbon...
Hi Turbo, i just unplugged by scrubber and took out my screens as i am preparing for the trip but i am a bit confused. My SPS are not doing well,...
cool you made my day with that answer :) thanks a lot Turbo for the prompt answer ....
